Using Coil Packs On Early SBC

[MonzaRacer]

Lee, do you have any pictures of this setup? Have you done away with the distributor?

No real distributor. The LT1 intake has no hole so we used a stub from one, extended the shaft and put our cam sensor hole in back of intake. Ill get Jerry to take some pics after he gets back in. Might take week or so. We made a bracket that mounted the coils/module on back of engine. We are still trying to package this set up, my biggest issue has been the shutter whee. Our first iteration would get magnetized then we would get signal scatter from sensors.
Like I said so far this unit has worked well compared to the last iteration.
Yes I am working on packaging and will try to show something soon.
Now that someone actually has shown interest.
If you are not looking for module driven set up it gets simpler.
Instead of needing 8 full driven outputs you only need 4. Make life lot simpler!