racpak hookup?

[eldogg]

I tried every way known to man to get the IQ3 and M-90 to work via can bus with no luck on Angelo Vespi's Camaro (DSE Build) I ended up using a USM (universal sensor module) and stand alone sensors. I hope this helps.

[autoxtech]

thanks for the update, did you by chance ever use 230-vm-obd2 module to convert it from the obd2 port off the m-90. thanks

[autoxtech]

ok after talking with mast , it does not seem like the racepak is going to work with there computer, i just need somebody to figure out if recap can support j1939 can coding. racepak is not helpful at all but mast has been very helpful. i can't believe that nobody has hook up this combo before.