Results 1 to 5 of 5
Thread: Ford 9" Housing with Drum Brakes
-
12-16-2015 #1
Registered User
- Join Date
- Dec 2015
- Location
- Nashville TN
- Posts
- 5
Ford 9" Housing with Drum Brakes
I have a ford 9" housing set up that I bought for my 1970 Buick GS455 I was able to get it bolted in but found out it was too narrow. The rear should bolt up to a G-body with little or no modification. The rear end housing is 58" wide measuring wheel mount to wheel mount which is the correct width for a G-body. The housing measures 53" wide from flange to flange which is also correct for a G-body. The axles are what I believe currie as is the housing. The axles have new bearings and seals installed in the housing. Southside Machine Performance sells adjustable upper control arm to bolt the rear housing into a G-body or weld on new upper mounts. The housing has been powder coated gloss black. I would like to get $500 for the housing which I think is fair.
-
12-16-2015 #2
Registered User
- Join Date
- Dec 2005
- Posts
- 69
Interested. PM Sent
12-16-2015 #3
Starting The Transformation
- Join Date
- Aug 2015
- Location
- Heber City Utah
- Posts
- 167
Location ?
12-16-2015 #4
Registered User
- Join Date
- Dec 2015
- Location
- Nashville TN
- Posts
- 5
Nashville TN
01-13-2016 #5
Registered User
- Join Date
- Dec 2015
- Location
- Nashville TN
- Posts
- 5
sold
Originally Posted by j455cb
i have a ford 9" housing set up that i bought for my 1970 buick gs455 i was able to get it bolted in but found out it was too narrow. The rear should bolt up to a g-body with little or no modification. The rear end housing is 58" wide measuring wheel mount to wheel mount which is the correct width for a g-body. The housing measures 53" wide from flange to flange which is also correct for a g-body. The axles are what i believe currie as is the housing. The axles have new bearings and seals installed in the housing. Southside machine performance sells adjustable upper control arm to bolt the rear housing into a g-body or weld on new upper mounts. The housing has been powder coated gloss black. I would like to get $500 for the housing which i think is fair.
Reply With Quote
