Started FWD Now We're Here

[CadillacMazerolle]

Like i said before, initially this was going to be a very quick and dirty swap just to do burnouts but while I was on Ebay searching for rear suspension solutions I "accidentally" oredered 4 coil over shocks. So instead of trying to mount a cross member and torsion bars that would have mounted inside the drivers compartment and going through the floor... Now i just had to modify the upper control arms to clear the new coil overs... ORR..just steal control arms i build for another project.







Powder coated.

"Ever tell yourself "don't touch that. its hot!" and you touch it anyways? Well i measured and said i need .750" more when i actually make the cut and didn't listen... Remember but more on that later."

WELL!!!! I accidentally cut the frame shorter than I intended which brought the tire closer to the firewall. This may have been fine except if I want to put a sizable wheel/tire package on there some day, the firewall would not allow it. The Toyota pickup specs out at like 1* caster so this actually left me room AND gave me an excuse to build custom lower arms with more caster and move the tires away from the firewall!!!