'Streamline' 1968 camaro project

[slimjim]

Thanks guys, appreciate the kind words.

James I have a 67 vert and debating on the 5th gen seats also. I have the tubs as well. Looks like it is just installing an elevated bracket for the tunnel clearance is the biggest thing. I don't know the actual width of the 5th gen seat but looks like it would fit the 48" narrower Camaro option. Not sure how the height is though. How tall does yours set up vertically. Getting the seats from local yard is not a costly deal but don't want to get if it wont fit. TIA

Radtexas, I don't have the measurements however my seat is now trimmed a bit. We lowered the backrest a little by trimming the lower portion of it so that it didn't stick up too high above the parcel shelf, although it still does by an inch or two. The base also sits a little higher than an original, this is just by design as the 5th gen is designed to sit on a flat floor, this is ultimately what we did with the brackets to mount it.
With the mini tubs you need to narrow the original fold-down seat bracket or make your own.