Results 1 to 14 of 14
Thread: Dog Tracking
Threaded View
-
07-31-2015 #1
Registered User
- Join Date
- Aug 2004
- Location
- Holmes Hollow, Ontario Canada
- Posts
- 991
Dog Tracking
Got my 68 Firebird on the alignment rack and the thrust angle is like 38. Way out of wack. The body seems straight but one rear tire is about an inch further forward or closer to the quarter than the other. The springs are fine and the pin is located. The alignment holes on the front subframe were good until the shop tried to line things up. The shock plates were even when I measured from the shock plates to the nearest subframe mounts. But I noticed one plate was 1/2" closer to the rear valance than the other side. I have an 8.5" out of a 73 Ventura in it. Like I said I did measure it and the body and frame seem straight. I was thinking of welding and redrilling the shock plate or using a thrust alignment kit unless there is something else I should be thinking about.
Any ideas?
thanks
____________________________________________
Scott
-
Reply With Quote
