Help with suspension

[rickierockit92]

I have a 66 el camino .. QA1 coil overs, QA1 tubular control arms, etc.. had another thread about having wheels off measurements under the fender wells .. Blah Blah blah. Long story short my alignment racks are junk. Took it to an alignment shop.. They rolled it up onto rack bc the camber was obviously off.. Then stated they couldn't do the alignment bc my ball joints, upper and lower.. And control arm bushings are all pretty much worn out. Too much play. I did not install coil overs or control arms so I don't know exact parts that were ordered.. I can replace the parts myself though and bring it back to shop. My problem is finding the parts I need.......... Can't find replacement parts on QA1 site. Plus I'm pretty sure I need to figure out the exact parts I hve to find the correct replacement parts. Anyone else been down a similar road? Googling stuff just doesn't seem to be specific enough for what I have. Thanks in advance! Just need to know how someone else has or would go about this

[Carl @ Chassisworks]

Try calling QA1. The internet is not the solution.