Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 2 of 2
    1. #1
      Join Date
      Mar 2015
      Posts
      251
      Country Flag: United States

      1974 Camaro with rusted out floor boards. Newbie needs advice.

      Hello all.

      Im really new to the site. My father and I are building his 1974 Camaro together. I just rebuilt his motor, that same day I finished I convinced him to replace the seat covers. Well As I was removing the rear seat I found that the seat bottom seat frames were rusted beyond repair. Well I lifted the carpet and found the rear pans need to be replaced. Decided to gut the whole car and I found quite bit of rust.

      My question is.
      What is the best way to remove/strip the entire floor or the car. I was using a wire brush and its taking a LONG time and I have only got one pan done. Is there a chemical I can apply that will remove the rust and paint?



      I will post pictures tomorrow of the damage so you guys get a better picture. Thanks for all the help. Looking forward to posting a build thread shorty.

      Ray


    2. #2
      Join Date
      Aug 2014
      Location
      Indiana
      Posts
      19
      Country Flag: United States
      Aircraft remover works well for removing paint and gunk. Just make sure that your area is ventilated. As for rust, I believe sanding, grinding, and cutting are your only options.


    Advertise on Pro-Touring.com