Autometer Speedo and Tach , Carbon Fiber SBC Valve Covers

[Paraman1]

Changed direction on a couple parts of my project so these have to go .

First up is an Autometer Tach and Speedo part number 5154 and 5160 . These are the older version when they were made of aluminum not the newer cheap plastic ones . Autometer offered me 300 for both of them but I figured I would offer them up here for 150 each plus shipping . Both are new and un-used other than for mock up purposes .



Parts are located in Boise Idaho and the best way to contact me is via e-mail at [email protected] or PM on the site .

[Bygblok]

How tall are the valve covers? I need a set that will clear roller rockers and poly locks. Thanks

[Paraman1]

How tall are the valve covers? I need a set that will clear roller rockers and poly locks. Thanks

2.625 inches without a gasket , 2.8 inches plus with a gasket (obviously depends on the thickness of your gasket) . I see no reason why they won't work with the roller rockers but I haven't a clue about the poly locks .

[Paraman1]

Still available .

[YOUNGER]

Emailed you......

[Paraman1]

Still available .

[Paraman1]

Still available .

[Paraman1]

Have had numerous people express interest but none have e-mailed me back after initial contact so these are still available .

[jeffbr33]

do you still have the gauges

[Paraman1]

still available .

[Paraman1]

Still available

[Paraman1]

Gauges are still available

[Paraman1]

They Have Risen ...... To the top of the list .

Happy Easter everyone