Results 1 to 3 of 3
-
12-11-2014 #1
Registered User
- Join Date
- Jul 2013
- Location
- St. George, UT
- Posts
- 1,144
LS choked out? Speedtech's Big tube headers...
For big hp LS engines Speedtech Performance has just introduced our new 2” primary tube, 3 ½” collector LS headers. These fully TIG welded Stainless Steel performance headers are made by hand in house and are available for ‘67-69 Camaros and ‘68-74 Novas for both our Pro Touring Subframe and the GM subframe.
If you’ve got an LS in the “lower” 450-550 hp range where 2” tubes might be a little too much, we also offer the same high quality stainless header in a 1 ¾” tube, 3” collector version. Check out our headers and other performance products at www.speedtechperformance.com.
Last edited by Ben@SpeedTech; 12-11-2014 at 02:23 PM.
-Ben, Creative Director at Speedtech Performance
We sell some really cool parts, build cool cars, and do cool concept renderings too!
435-628-4300 www.speedtechperformance.com
My Pumkinator build thread- https://www.pro-touring.com/showthre...ght=pumkinator
-
01-01-2016 #2
Registered User
- Join Date
- May 2015
- Location
- North central Montana
- Posts
- 83
Ben, do you have anything like this for the 66 Chevelle with ls and 6 spd manual? Bruce
01-04-2016 #3
Registered User
- Join Date
- Jul 2013
- Location
- St. George, UT
- Posts
- 1,144
Hey Bruce-
At this point we only have 1st gen Camaro 2" headers which may or may not fit a Chevelle. We don't have an A body platform of that year in the shop right now so we wouldn't be able to verify that. I think Stainless Works has a 1 7/8" or you may want to check in with Ultimate Headers. Good Luck!-Ben, Creative Director at Speedtech Performance
We sell some really cool parts, build cool cars, and do cool concept renderings too!
435-628-4300 www.speedtechperformance.com
My Pumkinator build thread- https://www.pro-touring.com/showthre...ght=pumkinator
Reply With Quote
