Results 1 to 20 of 106
Hybrid View
-
11-18-2014 #1
Registered User
- Join Date
- Sep 2011
- Location
- Southern Ontario
- Posts
- 640
Wow! Can you give us a few step by steps to show how that was made? Very nice craftsmanship.
-
11-19-2014 #2
Registered User
- Join Date
- Feb 2012
- Location
- SW, Michigan
- Posts
- 875
Here's a picture of the Chevelle we are doing currently in the shop.. The metal work on this was just normal panel replacement but in the second picture you can see we did a custom trans tunnel for a little more clearance.
11-19-2014 #3
Registered User
- Join Date
- Feb 2012
- Location
- SW, Michigan
- Posts
- 875
This picture is of a frame we are building for my personal project.
I think falls under the fabrication category.
11-19-2014 #4
Registered User
- Join Date
- Feb 2012
- Location
- SW, Michigan
- Posts
- 875
I have quite a few more pictures to post but this is the last one for now, I have a cross-member to build.
It's a tool I built to replicate the function of a Pullmax machine. I based it off of someone's plans and purchased a lot of the machined parts from the guy.
We need to get a Mill and Lathe in here then we will be able to do just about anything.
I will post a picture of one of the parts I made using this machine.
Reply With Quote
