Results 1 to 3 of 3
Hybrid View
-
09-25-2014 #1
Registered User
- Join Date
- Feb 2012
- Location
- SW, Michigan
- Posts
- 875
Looking for a nice clean wire routing clamp.
I am looking for a nice way to run the wiring down the side of the frame rail. I really don't wan to use zip tie clamps, or the strap clamp things, which I have used in the past.
The frame is not boxed in so i would like it to look good from both the outside and inside of the frame rail, so a push through clamp isn't working for me.. I would at least like something I can put a stainless nut on the back side.
Any thoughts appreciated.
-
09-25-2014 #2
Registered User
- Join Date
- Apr 2012
- Location
- Woodstock, IL
- Posts
- 2,410
How about billet line clamps for fuel lines?
-DaleSchwartzPerformance
The leader in bolt-in muscle car chassis
SchwartzPerformance.com | GMachineChassis.com | Facebook | Twitter | Instagram
Dealer for: Forgeline, RideTech, Tremec, American Powertrain, Silver Sport Transmissions, GM Performance Parts, RECARO, Cerullo Seats, TMI Products, Vintage Air, Baer Brakes, Wilwood, BeCool, AFCO, Tanks Inc, Holley / Hooker, Ultimate Headers, Rick's Tanks, Moser Engineering, Currie, TechAFX, Stainless Works, II Much Fabrication, and many more
09-25-2014 #3
Registered User
- Join Date
- Feb 2012
- Location
- SW, Michigan
- Posts
- 875
As of now that is what I am leaning towards.. I was planning to use notchhead line holders for the stainless air lines on this project but it leaves the end open so it wont' work for the electrical.. So now I may use the billet specialties for everything, but looking for other options.
Reply With Quote
