Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 7 of 7
    1. #1
      Join Date
      Aug 2004
      Location
      Annapolis, MD
      Posts
      451

      SOLD- Hydratech Hydroboost brake system with lines

      So I pulled the Hydratech hydroboost system out of my Camaro tonight. The forum member buying my car as a roller isn't going this route so this is available for sale. It comes with the booster and all the lines required to hook it up to your power steering pump and steering gearbox.

      i've been looking for the master cylinder, but so far I have been unsuccessful, though it may be in the trunk that I have only been able to see into through the pass through behind the back seat. Frank didn't give back the keys either so,it won't be too big of a surprise if the master cylinder is gone as well. I'll just chalk that up to the growing list of parts that are gone.

      so up for sale is the brake booster and lines. If I find the MC it will come with this as well. I will also provide the original paperwork and instructions from Hydratech. The kit is part number 3023, which uses the late model shallow master cylinder (the MC alone runs $79.95 from Hydratech).

      this kit runs $859, I'll sell this booster with the lines for $550 (+ 1/2 of the shipping to you) since it appears I do not have the MC, which if I do find I will throw in no charge.

      there are a few small sport of light surface rust on the body of the booster. I'm going to clean that up and paint the booster with gloss black POR-15. You'll also notice in my previous build pics that the accumulator was anodized blue, and that in the pictures in the second post of this thread show that blue accumulator. But the other pics it is silver. In reality what you see is the top is silver and the bottom is blue, best I can tell this is from Frank leaving the hood up exposed to weather and sunlight and harsh chemicals. I'll get the rest of the blue anodizing off and polish the accumulator to a nice silver shine and I'll post pics when I am done.

      Cheers,
      George


      Attached Images Attached Images          
      Last edited by navyflyer72; 08-21-2014 at 04:42 AM. Reason: Part sold


    2. #2
      Join Date
      Aug 2004
      Location
      Annapolis, MD
      Posts
      451

    3. #3
      Join Date
      Dec 2009
      Location
      Brunswick, GA
      Posts
      266
      Country Flag: United States
      I'll take it. Pm sent. Just let me know how much half shipping is to 31520. Thanks bud
      1967 Camaro RS/SS - Project "Skunkworks" in Progress...

    4. #4
      Join Date
      Dec 2013
      Location
      Down Under
      Posts
      18
      Country Flag: Australia
      If it aint sold I'll definately take it.
      Going to have to find out what freight to 2650 Australia is worth.
      Let me know ASAP.
      Al.

    5. #5
      Join Date
      Nov 2013
      Location
      Minnesota
      Posts
      91
      Country Flag: United States
      Put me third in line if the other deals fall through.
      '68 Camaro - 5.3 LS w/76 mm Precision turbo (& intercooler) - ProEFI - T-56 trans

    6. #6
      Join Date
      Aug 2004
      Location
      Annapolis, MD
      Posts
      451
      SPF to first bidder (PM'd me before any posts were made). Will let everyone know if deal falls through.

    7. #7
      Join Date
      Aug 2004
      Location
      Annapolis, MD
      Posts
      451




    Advertise on Pro-Touring.com