Push Button Start with RFID key (keep the key in your pocket!)

[MCB Matt]

ok... After some digging, reading install manuals and such. They essentially have three modules. Pbs, pbs-2, and the pke.

The pbs module appears to be their "older" product line. It has a key fob with a button to activate the ignition. You can also program it to activate based on proximity.
The pbs-1 kit just does the ignition.
Pbs-ii kit also allows you to open doors, lock / unlock doors (by pushing button on key fob), pop trunk, and etcetera.
They have a pbs-tr system which uses a passive rfid card (no battery or fob) that has to be 6" away from the antenna that also does just ignition. This would be ideal for a roadster for example.

Their pke system module is the passive keyless and alarm system module. It automatically unlocks doors and disarms the alarm as you approach, lock on vehicle start, unlock when the vehicle is off, locks doors and arms alarm when you walk away.
The 2go-pke system is just the pke module.
The ikey system is the pke module and the "newer" pbs-2 keyless ignition module.
The ikey rs system is the pke module, the pbs-2 module and has remote start enabled.



matt - feel free to use this if you wish, if you have any additions or corrections i can update it or just send you the file to do as you wish.

NICE!

Thank you very much for the help, we have a LOT going on here with so many new product lines, website work ect..



Matt