My 80 Z Clone Pro Touring in progress

[J. Chris Davis]

It certainly is. I found them on ebay. Not expensive either. Or at least weren't at the time.

[J. Chris Davis]

I have repainted the passenger T-top trim and have the T-top shade completed. Found the plastic panels for the T-top shades on eBay then added Dynaliner and headliner material.

[J. Chris Davis]

Driver T-top trim painted and shade installed. Light reflection from my florescent lights caused a bit of a glare.

[J. Chris Davis]

Got the shifter back from being chromed after bending to fit this console. I also replaced the shifter knob with a black and white instead of the white and black. This should finish the interior and now on to the trunk.

[J. Chris Davis]

​Some updated interior pictures now that it is completed and detailed.



















- - - Updated - - -

Started working on the trunk with cardboard mockups. Working on the subwoofer enclosure, floor and sides currently.

Hopefully this project will go as planned.

[J. Chris Davis]

Got the measurements done and just need to get to the lumber yard this weekend. Then I have several other items on order for this project.

I did get the carpet glued down to the trunk floor. Had to order more for the rest of the panels.

Also got the wires all loomed and ready to go where they need to go.

[J. Chris Davis]

Made some more progress on the trunk. The sub box is built and wired. The front face is cut out but still needs to be trimmed a bit more to fit.

[J. Chris Davis]

Subwoofer box, face panel and subwoofers finished and installed. Next will be the floor panel.

I also need to fix below the left subwoofer where the screw pulled on the carpet.

[J. Chris Davis]

Another little update. The floor panel is done and installed. Working on the back panel next.

[jaybee]

Heck yeah, I love the home brew stuff, and it looks great.

[J. Chris Davis]

Thank you!

[J. Chris Davis]

Quick update. Got the rear bumper back on and some more progress on the trunk project. Getting close to being done.

[J. Chris Davis]

So I came across these tail light weather strip brackets through a Youtube video from Double R Restorations.

He purchased these from Gordon Crowe Fabrication who makes these brackets.

They work great for getting that corner of the weather strip to to sit correctly.

Shout out to Double R Restorations for the video that led me to these and

a shout out to Gorden Crowe who is producing these for our late second gen Camaros.

I have a link below for the video from Double R Restorations and Gordon Crowe's FB page where you can reach him.



Double R Restorations video

https://www.youtube.com/watch?v=tnaP...eRRestorations



​Gordon Crowe Facebook

https://www.facebook.com/gordon.crowe.961

[J. Chris Davis]

Just about done. Side panels are ready to go. Waiting on a tail light wing nut then I can assemble everything.

[J. Chris Davis]

The trunk project is now complete. Other than cleaning up the tires some more the Camaro should be all finished.

[J. Chris Davis]

Got it detailed and outside for some pictures.

[J. Chris Davis]

Took the Camaro to a local car show this las weekend. Won a top 40 award

[79 Camaro]

I used the same seats in my 73 Z28 Camaro with a LS3/TKO 600 swap. Great seats at a reasonable price.
Pic.

[J. Chris Davis]

I agree! I am very pleased with these seats.

[ryeguy2006a]

Love the car man, very clean install of the subs and amp. Nicely done.