parting out project new in the box MSD ignition- full sets of autometer gauges, nash5

[scotzilla]

new nash 5 speed- will tear it down to get gear info this weekend- It does have the later style allen bolt support on the passenger side of the case. $2000


The motor is a 4 bolt (casting 3970010) with 350hp corvette fuelie heads ( casting 340292). It was also built about 5 years ago and never run. It has new valve springs (larger than factory), new valves, crane rockers with girdles, solid roller crane cam and lifters, forged crank, polished stock rods, bb oil pump, Milidon pan, Hooker super comp headers, chevrolet performance valve covers, victor jr intake, forged srp pistons, MSD billet distributor, msd coil, MSD wires, msd box all new in the boxes, Aluminum flywheel, new clutch, TCI high torque mini starter. $3600

will part the ingition system out for $550- box, wires, billet distributor, blaster 2 coil



full set of autometer gauges 4413, 4491, 4421, 4496, 4431 $500 - summit sells for $725

Adjustable timing marker pt #02354 $40

ARC wiring harness 3721 $300

Kirkey seats $325 pair

Fuel cell $ 100

auto meter nexus water temp gauge New in box 6455 $75 (ding on exterior ring) $216 on summit

[FasstChevys]

I'm going to guess that these gauges are for old school, and do not work with LS engines - is that correct?

[scotzilla]

[scotzilla]

they could be hooked to anything ls, old school whatever

[wyreraid1]

How much for all of the ignition parts?

[firebirdzig]

How much for the auto meter gauges minus the speedo

[jake72ss]

what type of brakes are those C 5? C 4?