Results 1 to 8 of 8
Thread: "Sloper"
Threaded View
-
09-22-2005 #5
New to Pro-Touring
- Join Date
- Nov 2004
- Location
- Mesa, AZ
- Posts
- 31
Matt-
It's on the front panel, right next to the pulser function. It is a toggle switch. Quoting from the manual "When in the off position the sloper is inactive. Selecting the on position activates the Sloper. Selecting the Spot position activates the spot welding timer. The slope sequence and spot modes are activated by a remote on/off switch connected to the 8-pin receptacle. See the section on slope sequence."
So I go to the section on slope sequence... "1. Set sloper switch to slope position; 2.Rotate amperage control to desired welding current level; 3.Rotate SPOT TIME/DOWN SLOPE control to desired UP/DOWN slope time."
It states the obvious of how to engage the sloper, but I am curious about what it is. Is it some "magic setting" that once I know its function I will never want to weld without?
Nate
-
Reply With Quote
