Results 1 to 2 of 2
-
06-05-2014 #1
Registered User
- Join Date
- Jul 2012
- Location
- Greenwich CT and NYC
- Posts
- 320
DSE Panhard bar adjustment, need a few tips to DIY
I need to adjust my rear about 1/4 inch to the left and my DSE Panhard bar ito adjust because it needs to be unbolted and removed for adjustment, Mustang Quadralink. I also need to remove my rear exhaust section to get access to these bolts.
-
06-05-2014 #2
Registered User
- Join Date
- Jul 2012
- Location
- Greenwich CT and NYC
- Posts
- 320
ignore this post i just went under the car and i realized the DSE panhard bar has a built in swivel link with a welded stud on the bar so i can rotate it to adjust while its in the car. I got mixed up with the old panhard bar i took off the car which was from Heidts and that had to be unbolted to adjust.
Reply With Quote
