Results 1 to 9 of 9
Thread: LS6 intake on 383 stroker
-
05-23-2014 #1
Registered User
- Join Date
- Aug 2013
- Posts
- 17
LS6 intake on 383 stroker
I'm guessing not, but does anyone know if an LS6 intake and injectors will fit onto a chevy 383 stroker motor. Is there modifications to the block to make one fit?
-
05-23-2014 #2
Registered User
- Join Date
- Jul 2006
- Location
- Pensacola, FL
- Posts
- 1,264
Is it an ls1 383 or sbc 383?
05-23-2014 #3
Registered User
- Join Date
- Apr 2012
- Location
- Woodstock, IL
- Posts
- 2,410
LS6 intake on 383 stroker
Intake manifolds bolt to the heads, not blocks. There's no possible way of fitting a gen 3/4 intake to a gen 1 or 2 small block.
LS6 intakes only bolt to ls1/2/6 heads.
-DaleSchwartzPerformance
The leader in bolt-in muscle car chassis
SchwartzPerformance.com | GMachineChassis.com | Facebook | Twitter | Instagram
Dealer for: Forgeline, RideTech, Tremec, American Powertrain, Silver Sport Transmissions, GM Performance Parts, RECARO, Cerullo Seats, TMI Products, Vintage Air, Baer Brakes, Wilwood, BeCool, AFCO, Tanks Inc, Holley / Hooker, Ultimate Headers, Rick's Tanks, Moser Engineering, Currie, TechAFX, Stainless Works, II Much Fabrication, and many more
05-23-2014 #4
Registered User
- Join Date
- Aug 2013
- Posts
- 17
Yeah I just meant onto a gen 1 or 2 small block engine. So is there any way to put ls1/6 heads onto the sbc? Basically the top end of an ls6 onto the bottom of the small block? I haven't heard anything about it and don't know enough about the ls series engines and their components.
05-23-2014 #5
Registered User
- Join Date
- May 2010
- Location
- kitchener,Ontario,Canada
- Posts
- 2,357
No...never in a million years would it work.
My question is why would you want to do that in the first place
Spinnin'my tires in life's fast lane
Ryan Austin
On twitter ... soon to be revived ...
On Instagram ryanaustinss70
05-24-2014 #6
Registered User
- Join Date
- Dec 2010
- Location
- St Louis
- Posts
- 453
Other than the bolt and port pattern differences, you'll have to drill a hole for the distributor......
05-24-2014 #7
Registered User
- Join Date
- Dec 2005
- Location
- Birmingham, AL
- Posts
- 3,355
I believe dart makes a block that takes gen 3 and up heads and intakes. I am sure it is pricey though.
Stephen
05-27-2014 #8
Registered User
- Join Date
- Jan 2011
- Location
- Boston, MA
- Posts
- 1,180
The intake/exhaust patterns are different too. SBC cam wouldn't work with LS heads/intake. You'd have to do a custom grind. Head bolt pattern is different, intake bolt pattern is different, header pattern is different...
I think it would be much easier/time efficient to swap an LS in place of your 383.
05-28-2014 #9
Registered User
- Join Date
- Aug 2013
- Posts
- 17
Yeah I figured it wouldn't work. I am completely happy with my current setup, just was curious.
Tags for this Thread
Reply With Quote
