FS: '02 LS1 Trans Am / Camaro CALIPERS, MC, and dimpled/slotted ROTORS

[damannhw]

I've pulled these parts from the donor car that I'm using on my build. The car was a 2002 WS6 TA w/ low miles and was a running/driving car when I bought it last year. I just pulled these front brake parts a few weeks ago, and they need a little clean up, but I though someone here could use them. I can take paypal or MO's, and ship cost will be calculated actual to your door. The rotors might prove to be cost prohibitive to ship.

I also have miscellaneous small parts still available from the rolling shell before it goes to scrap if you have any requests.

Pics:

Calipers & abutments w/ brake hoses still attached and new pads : $60 + ship




__________________________________________________ __________________________________________________ _____



master cylinder $10 + ship (hard lines still attached if you want them)



__________________________________________________ __________________________________________________ ____________

Dimpled/Slotted rotors, unknown make, good shape. $50 + ship (pricey I bet)
For a few more bucks I can glass bead these to remove the surface rust if desired.

[mikewoods]

I'm looking for the rear brake backing plates from an Ls1 car, do you happen to have them?

[damannhw]

I'm looking for the rear brake backing plates from an Ls1 car, do you happen to have them?

Sorry, sure don't, I used those on my car. Call Hawks Third Gen. They have an F-Body salvage yard here in SC and the owner is a good friend:
http://www.hawksthirdgenparts.com/

[mikewoods]

Sorry, sure don't, I used those on my car. Call Hawks Third Gen. They have an F-Body salvage yard here in SC and the owner is a good friend:
http://www.hawksthirdgenparts.com/

Thanks for the tip! Bruce hooked me up with what I needed!

[rickpaw]

__________________________________________________ __________________________________________________ ____________

Dimpled/Slotted rotors, unknown make, good shape. $50 + ship (pricey I bet)
For a few more bucks I can glass bead these to remove the surface rust if desired.

FWIW, those rotors will fit in USPS large flat rate priority box ($16 shipped anywhere in the US). Makes one heavy box though.

GLWS

[damannhw]

Thanks for the comments/info guys ^

For those interested, just send me an offer on this stuff. I'm just cleaning up and trying to get these parts to someone who may need 'em.