My wife's old car. '66 Mustang

[I_make_oil]

2 and 1/2 years is ok. It's surprising how much time it takes to do things well.

Thanks

[joe28443]

Love those pictures

[Z06killinSBF]

Looking good, sorry I deleted your FB request (didn't recognize who it was), send it again.

[I_make_oil]

Wiring is coming along. Also have the Lokar throttle installed. Ignition will be hooked up soon. Pretty excited. I included a picture of my car next to a Toyota Corrola. It sure is low. You don't realize how small these cars are until you have it next to something else.

[wyattroa]

what was the color code for the paint?

[I_make_oil]

Ford Sterling Gray Metalic. M7205A, UJ

[I_make_oil]

I don't know if this will work or not. Links to the motor start up and the air ride working on my Facebook. Getting closer all the time.

https://www.facebook.com/benjy.wells...30641386965840

https://www.facebook.com/benjy.wells...34546953241950

[Bob in St. Louis]

Pages don't load, but I'm not a FB member, if that matters.

[I_make_oil]

I will have to figure out how to upload videos. Hope to have more soon.

[Bob in St. Louis]

Roger that.
Youtube is free, if that helps.

[I_make_oil]

Still moving along. The small things are killer. I hope to be finished up by the end of January. I'll post updated pictures soon.

[rhurley]

Looking forward to see it done!

[I_make_oil]

Life has been crazy busy. Haven't posted in a while. She is almost finished. Have some issues with the plumbing. Also had some paint issues. All the paint is sorted and working on the plumbing. Holding up on the interior until the mechanical bits are all sorted. This March pully system looks great but causes all kinds of issues running the top radiator hose. I have an idea that will hopefully fix this problem. Also dealing with the AC hoses is a PITA.

[I_make_oil]

The rear bumper is tweaked a bit on the passenger side. That bugs the crap out of me. I'll deal with it later. Right now I just want it finished and on the road. I'll sort those things later.

[I_make_oil]

I bought lots of my parts well in advance. Actually got ahead of myself. This caused me to forget who I ordered some parts from. To loose some stuff and to have other items replaced by the latest and greatest before my car is even on the road. I had a plan going in for what I wanted and worked hard to stick to the plan to keep costs in line. I don't think there is a way to do a project like this without running into these issues.

[HotRod47]

Car looks great!!

I had the same issues with the March Perf set up and not being able to run a correct upper hose. I took a stock hose, cut and taped it to shape and searched the back room of the local parts store, all to no avail. In the end I bought some mandrel bent steel tubing pieces from Speedway and cut/spliced and welded one upper hose. I then did some body work and painted it to match the car. It actually looks good and worked perfectly. Just a thought.

[I_make_oil]

I think that is the answer. Thank you.

[HotRod47]

I think that is the answer. Thank you.

Glad to be of some help.

[I_make_oil]

She is almost plumbed. I am out of the country until the first week of May. In May we begin interior work. I’m putting plates on it in May and hope to have it on the road working out the bugs by June. Fingers crossed. I’ll post up more pics when I get home and take them.

[craigF]

Love this build and great to see it still on going.
Your rear was an inspiration for my build.
Love the way it sat down��