Results 1 to 3 of 3
-
04-22-2014 #1
Registered User
- Join Date
- Nov 2012
- Posts
- 88
Tire and wheel help on mini tubbed second gen
Im putting the Detroit speed complete mini tub kit on a 75 trans am, my question is I want to narrow the rear and would like to know if anyone can give me their specs or advice? I want as deep of a dish on the wheels as I can get without problems, so how much should I narrow and what backspace on say a 18x12 with a 335 tire? Any help appreciated.
-
04-22-2014 #2
Registered User
- Join Date
- Apr 2012
- Location
- Woodstock, IL
- Posts
- 2,410
Tire and wheel help on mini tubbed second gen
A 58" wide rear looks good in my opinion. I wouldn't go less than 56" unless you want a reeeaaally deep dish.
There's a 1970 firebird in our Completed Projects section of our website. Go to it, there's a shot of the rear and you can see the dish on those. That's a 58" rear end.
-DaleSchwartzPerformance
The leader in bolt-in muscle car chassis
SchwartzPerformance.com | GMachineChassis.com | Facebook | Twitter | Instagram
Dealer for: Forgeline, RideTech, Tremec, American Powertrain, Silver Sport Transmissions, GM Performance Parts, RECARO, Cerullo Seats, TMI Products, Vintage Air, Baer Brakes, Wilwood, BeCool, AFCO, Tanks Inc, Holley / Hooker, Ultimate Headers, Rick's Tanks, Moser Engineering, Currie, TechAFX, Stainless Works, II Much Fabrication, and many more
04-22-2014 #3
Registered User
- Join Date
- Nov 2012
- Posts
- 88
Ok I will, thanks
Reply With Quote
