68 fastback, new pics lowered

[outrgus]

Just finished some up suspension work on the car. Drop springs and mid eye leafs. bilstein front/ rear shocks, global west strut rods, roller spring perches, boxed lowers, 1 inch sway bar, etc. 275/40/18 rear, 245/40/18 fronts.

[rustomatic]

That's perty!

[aidanfancystang]

That's sweet, are you going to bring it out to the grey eagle shows this summer?

[outrgus]

I go to Grey Eagle regularly in the summer.
Will try and make Spring Thaw on the 27th of April, at Deerfoot Mall also.

[Mr Grant 666]

Love it!

[riles]

Very nice. Huge fan of the 67/68 fastbacks and like the way yours sits.

[outrgus]

Got a wheel alignment today and finally got to take it for a spin. Corners very well and ride quite nice. Needs a bit more caster, and after a bunch of measuring i have found my drivers side strut rod mount is welded 1/2 inch more rearward than my passenger side from the factory, causing the strut rod to max out and not allow more than 1 degree camber. Guess i will remove the mount and reweld it in the right spot. Always something.

[outrgus]

Just got back from the 50th Mustang Celebration in Las Vegas, Took a few pics of the car when we went to Red Rock Canyon.

[aidanfancystang]

cool did you go down with the guys from the Calgary mustang club?

[outrgus]

I seen a few members down there, but just my wife and i went down by ourselves. It was a good time, car ran flawlessly in the heat (32 plus degrees C). Should has done the open track, but since i had not driven the car with all the suspension mods i did over the winter, didn't want to risk it.