Another quick project

[astroracer]

I've had my hydraulic press sitting on these small HF trundle carts for a couple of years now. Makes it easy to move around. It's time to get it onto a dedicated cart.

I used some more of that 2 x 2 tubing I used for the cut-off rack. I also had a couple of pieces left over from a couple of engine stands I repurposed into a chassis rotisserie.

I ran the flap disc over the 2 x 2 after cutting them to length. All ready to square up and weld. It's a little smoky after a few minutes of welding.


The press has angle iron outriggers that keep it from tipping over. I will use these on the new cart. I'll cut them to length and weld them on.

I wire brushed all of the welds and brushed on a coat of black Rustoleum.

This will have to dry before I can put it all together. I plan to add a shelf on the cart to hold all of my press dies.