Results 1 to 9 of 9
Hybrid View
-
09-19-2005 #1
Registered User
- Join Date
- Jul 2003
- Location
- Anaheim Hills, CA
- Posts
- 11,967
I buy all my Recaro stuff from Dave Turner Motorsports so take this as another reccomendation for them..
You will need to saw off the first two holes on your Recaro seats. If you have the power models they will still sit a bit high. My next ones will be manual adjust so my helmet does not touch the roof.
Again, the brackets are fine but you will need to trim up the sliders. There are three mounting holes to choose from and you will need to cut off the taller two. If you could get the seat to go even lower that would be better but I don't mind sitting a bit higher up (Im 6'0)"A ship in port is safe, but that's not what ships are built for."
1968 Track Rat Camaro:
https://www.youtube.com/watch?v=SGHJ5c1yLIo&t=2s
1971 Chevelle Wagon with a few mods:
https://www.youtube.com/watch?v=WBVPR3sRgyU
-
09-19-2005 #2
Registered User
- Join Date
- May 2002
- Location
- Southeastern WI
- Posts
- 1,489
I can't help you with the seats, but I do have the brackets and sliders for you. I will pass them along at a screaming deal if you can use them.
Jeff
09-20-2005 #3
Registered User
- Join Date
- Aug 2004
- Posts
- 83
Interest in sliders
If 4MuscleMachinesMan doesn't want them, I'm interested. Where did you get the sliders, how much do you want, and will they work with Recaro Trend seats? I'm in AZ.
Reply With Quote
