DSE Quadralink Alternative Crossmember

[another69]

Has anyone installed the Quadralink without their crossmember? I'm curious if it can be installed with another type of shock mount that doesn't require cutting up the floor.

[Decline]

If you figured out how to ditch the crossmember my guess would be you'd need a shorter shock also. Besides the lack of reinforcement issue that would need to be addressed, I would question weither the suspension would operate as intended after that.

A better alternative in my opinion would be to chose a system that fits below the floor. One of the torque arm systems is a great choice if you still want a pan hard bar. Or one of the canted 4 bars if you still want a four link.

If your car is already nice and you don't want to cut it up stick to a more bolt on friendly system. Dse parallel 4 bar is invasive.

[another69]

Yeah kinda what I figured, just curious if it is done just to achieve a really low ride height or to clear the upper arms.

[rohrt]

I wonder...

ridetech has there 4 link that uses a bolt in bar under the rear (no cutting of the trunk floor). I wonder if their coil over setup could be adapted?