Results 1 to 6 of 6
Thread: C6 upper A arms settings
Hybrid View
-
12-02-2013 #1
Registered User
- Join Date
- Sep 2009
- Location
- Annecy France
- Posts
- 91
C6 upper A arms settings
I am looking for the settings of the upper A arms for a C6 corvette.
please see my drawing coutrtesy of AME website :
degree angle between the 2 red lines
degree angle from vertical to green line
thanks a lot69 mustang in the built
70 cuda 440 in restoration
-
12-21-2013 #2
Registered User
- Join Date
- Oct 2012
- Posts
- 12
Can anyone help on this one? I am also interested in this information. I realize all setups are not the same, but a starting point or range would be helpful.
- Rod
1966 Mustang. Under construction.
12-22-2013 #3
Registered User
- Join Date
- Dec 2011
- Location
- Planit Oahu, Hawaii if you don't belive me check shipping prices
- Posts
- 255
Can you give a link to the AME websight
12-22-2013 #4
Registered User
- Join Date
- May 2002
- Location
- Northern California
- Posts
- 10,716
MrQuick ΜΟΛ'ΩΝ ΛΑΒ'Ε
12-22-2013 #5
Registered User
- Join Date
- Dec 2011
- Location
- Planit Oahu, Hawaii if you don't belive me check shipping prices
- Posts
- 255
Ron needs to give some input, he seems to be the resident suspension Guru.
12-26-2013 #6
Registered User
- Join Date
- Oct 2012
- Posts
- 12
Ron you out there?
Dimension from the lower a-arm mounts in the vertical place would be great too. Just throwing it out there...
- Rod
1966 Mustang. Under construction.
Reply With Quote
