GMPP LS3 harness- looking for CEL wire

[sjaroslo]

Yep, that's it! By the way, and I won't direct this at anybody but myself, because it took me a while to figure out, but what Scot shows in the picture is actually a male and a female plug together; it pops apart for adding the wires.



And, since I was just tinkering with mine YESTERDAY, I'll add the following tid-bits: When you look at the back of the connector where you add the wires, you'll see a bunch of little green silicone nipples (you can kind of make them out in the picture, sticking out through the purple wire separator); these are the dust caps for unused cavities and you'll want to PULL out the ones where you need to add wires (you can easily do this with your fingernails). I PUSHED one in and ended up spending 15 minutes futzing around with it until I found a pair of skinny tweezers and was able to pull it out. Also, I trotted down to my local Chevy dealer to buy the needed Delphi connectors and wire seal and they informed me that they do not have any to sell. Looking online for the part numbers yielded many places that had thousands of them but only sold in minimum lots of 4000, etc. Kind of rough when you only need 6. Anyway, I found ElectricalHub.com that sells the terminal (15326269) and the wire seal (15366021) in packs of 50 for $6.25 and $4.00, respectively, and I just ordered them. SO, depending on how fast you need them, I would be happy to send you what you need from my supply, once it arrives. PM me if you're interested and have some time. They have a $35 minimum charge (or it looks like they just add on a $5 surcharge if you don't meet the minimum) but I was able to find enough cool stuff on their site that I "needed" to clear the minimum). (Sorry, didn't see the recent posts while I was typing this)