Results 1 to 12 of 12
Thread: Spring rate Question
Threaded View
-
11-06-2013 #4
Registered User
- Join Date
- Oct 2011
- Location
- Camarillo, CA
- Posts
- 78
The spring rate of the coils springs only effects the sprung rate. With a heavier rear axle you can increase the compression on the rear shocks, however, I don't think the Koni's you are running allow this adjustment. If you lowered your Panhard Bar with the new rear axle you should increase the rear spring rate. I'm running 300# springs with the Panhard Bar about 2" below the axle centerline. Hope this helps.
-





Reply With Quote



