64 Fairlane "Anti Mouse"

[Jetfixr320]

Very nice build. You went all out smoothing the engine bay out!

Those #'s by the hinges shouldn't matter. You just need to keep the VIN #'s from the front aprons.



Steve

[Crazed]

We are going to spice in the vin plates from both aprons after the new ones are welded in, And are just going to remove those #s by the hinges.

[67cougnut]

great build! Followed!

[neongreen]

Nice!

[Crazed]

New Heater


Cool welding Pic


We are plating the "Frame" between the Mustang II front end and where a tranny crossmember/subframe deal was done before I got the car.

[Martin71RS]

Nice job on the new sheetmetal :-) cool car!

[Dave B]

Looks awesome!

[blade]

Looking good! Can't wait to see the final product! Was there something wrong with the white car? Why did you part it?

[Crazed]

White car had a hard collision back in 2000, was put together ok? but still had unibody issues and the title was marked.

[windsor]

Wow! What's the actual intended use for this? Hot street car?

[Crazed]

Wow! What's the actual intended use for this? Hot street car?

Yeah, Hot street car is a good description!

[windsor]

Well I dig it!

[Crazed]

Picked up a new lower steering column mount..

Been awhile since all the front sheetmetal was on..

Underhood pretty much ready for paint..couple small holes to fill

Working hood gaps...

Hood to cowl is next..


Quarter panel came back from the stripper..


Hanging in place for looks..

[Crazed]

More random engine compartment pics, mainly cleaning up all the welds..



Cleaned up the stiffener plates we welded in from the MII crossmember going back...


Front braces boxed up front ...







Mocking up the quarter..



Some light bodywork needed here..

And here..


Little corner patches..


Column mount..

[LSXZ28]

Looks great so far! Can't wait to see it finished!

[SparkyRnD]

That's a great looking car, and cool fab work on the build. Makes me wish my 64 500 was a 2dr.

[Crazed]

Working the inner fenders where they connect to the core support..




Also filled all the unused holes in the core support




Scotty didn't likt the tabs on the hood bump brackets so he removed them and welded the brackets on..




Patch panel is made for the rear inner fender

Tacked in..




Inside veiw with the fender on, see the nice fit..




More welds..



Fender off again..




And held on with clecos..

[gmgiuffre]

Great looking work!

[Crazed]

Been awhile since I posted, been letting my back account recover a little, but we are going to get back at it..

I got this for christmas, fresh replacement factory wheel



I am going to get these valve covers, fabricated and finned



Looking at this air filter housing, Polished and finned



Got these Mock up hinges from RingBrothers, for a 65 Mustang



Hood hinge, trunk hinge, both 65 mustang. (trunk ones do not fit at all)



These are the version of hood hinges I will get when I send the mock ups back



Inside of the quarter panel coated with John Deere synthetic enamel



More enamel

[Crazed]

Quarter panel fitted up for the last time



Mock up hood hingw pics, these things are WAY nice







Thinking of going to a Shelby type mirror