Results 1 to 4 of 4
Thread: Delrin leaf spring bushings
-
09-01-2005 #1
Registered User
- Join Date
- Jan 2005
- Location
- McMinnville, TN
- Posts
- 498
Delrin leaf spring bushings
Would Delrin leaf spring bushings be a good idea for a daily driver with occasional road coursing or should I stick with polyurethane?
-
09-01-2005 #2
Registered User
- Join Date
- Oct 2004
- Location
- IL/TN
- Posts
- 908
neither... rubber!
https://www.protouringf-body.com "doing what they say can't be done"
-
09-01-2005 #3
Registered User
- Join Date
- Dec 2002
- Location
- Lost Wages, Nevada
- Posts
- 2,684
Ive been running GW's del-a-lums for 10+ plus years. The chassis has seen the street as a daily driver for most of that and double duty at the track as well. I would run them if you have the means.
And unless your going to run a pan-hard bar in the rear suspension, or some other lateral locator, rubber isnt going to cut it. I would also run the other way from using poly.......
-
09-01-2005 #4
Registered User
- Join Date
- Jan 2005
- Location
- McMinnville, TN
- Posts
- 498
The Delrin bushings would not be a problem to acquire since I can turn them out on the CNC lathe at the shop. I'm just trying to see if it's feasible to run them over polyurethane bushings.
Reply With Quote
