Results 1 to 6 of 6
Hybrid View
-
09-08-2013 #1
Registered User
- Join Date
- Feb 2011
- Location
- CA
- Posts
- 255
GMR FABRICATED Steel C5/6 Uprights
Up for sale is my personal set of Fabricated C5/6 Uprights (steering knuckles). My project has gone another direction and these beautiful pieces will not be needed
These are for the serious track enthusiast, NO deflection here! And are as light as the OEM's! These would be over $1700.00 +tax to duplicate,,,,, but you can have my set for $1200 obo!
***These will accept your current steering arm (Art Morrison, DSE, etc.)
Jay
"Owner....fastest car on jackstands!"
-
09-08-2013 #2
Registered User
- Join Date
- May 2010
- Location
- kitchener,Ontario,Canada
- Posts
- 2,357
Will these fit a 70 chevelle ?
09-09-2013 #3
Registered User
- Join Date
- Feb 2011
- Location
- CA
- Posts
- 255
If you are currently running C5/6 type suspension, then yes. If you have stock suspension, no. Hope this makes sense. Thanks.
Originally Posted by raustinss
Jay
"Owner....fastest car on jackstands!"
09-09-2013 #4
Registered User
- Join Date
- May 2010
- Location
- kitchener,Ontario,Canada
- Posts
- 2,357
No suspension right now but I know the planned Z06 brakes or purchased Z51 brakes will work and suspension was going to be SPC tubular uppers and lowers
09-09-2013 #5
Registered User
- Join Date
- Feb 2011
- Location
- CA
- Posts
- 255
Originally Posted by raustinss
These will not work with this type suspension. Sorry. CPP makes a Upright for your car that accepts the C5/6 Hub and is very strong.... and much less money.Jay
"Owner....fastest car on jackstands!"
09-10-2013 #6
Registered User
- Join Date
- May 2010
- Location
- kitchener,Ontario,Canada
- Posts
- 2,357
Ok thanks for the info, I'll have to check them out. Good luck with the sale
Ryan Austin
Reply With Quote
