ls swap with stock f-body oil pan?

[brycedrue]

doing a swap in my 69 camaro and i was able to set the engine back far enough to use the stock f-body oil pan. has any else done this? is there any clearance issues i might run across? i know the headers with fit and I am getting the kwik brackets, hopefully the t56 will bolt up without hitting the firewall. The block is damn close to the firewall

[67CamNKC]

I was able to do it, but the pass side head was very close to the firewall and the centerlink was close to the pan. Several people have said that the centerlink will flex. I went ahead and notched my pan and put about an inch behind gap behind the head.