Results 1 to 4 of 4
-
07-10-2013 #1
Registered User
- Join Date
- Oct 2010
- Location
- SLC
- Posts
- 659
borgeson steering box identification?
I found a power steering box locally being advertiesed as a mustang steering box. it does look like the same bolt pattern as a mustang steering box, but i noticed It only takes 3 turns lock to lock. is it possible that this steering box is for the C3 vette? and even if it is, is it compatable with the mustang? a 3 turn steering box would be sweet.
Zach
1970 Mach 1 build - Half-Breed (pro-touring.com)
-
07-10-2013 #2
Registered User
- Join Date
- Apr 2009
- Location
- san diego
- Posts
- 5,101
My 67 mustang box is 16:1 ratio or about 3 turns lock to lock. I also run a 2:1 quickener.
My build thread: https://www.pro-touring.com/showthre...ing&highlight=
The mustang build thread: https://www.pro-touring.com/showthre...el)&highlight=
07-11-2013 #3
Registered User
- Join Date
- Oct 2010
- Location
- SLC
- Posts
- 659
I have a stock 70 mustang box that is a 16:1 that is 4 turns lock to lock. 3 turns should be in the ball park of a 12:1 ratio.
Originally Posted by Bryce
Zach
1970 Mach 1 build - Half-Breed (pro-touring.com)
07-11-2013 #4
Registered User
- Join Date
- Apr 2009
- Location
- san diego
- Posts
- 5,101
hmmm... I will go check mine again.
My build thread: https://www.pro-touring.com/showthre...ing&highlight=
The mustang build thread: https://www.pro-touring.com/showthre...el)&highlight=
Reply With Quote
