Results 1 to 5 of 5
Thread: transmissions and driveshaft
-
07-02-2013 #1
Registered User
- Join Date
- Apr 2013
- Location
- New Hampshire
- Posts
- 26
transmissions and driveshaft
I just bought an $800 aluminum driveshaft for a th350 and realized i want a t56. will this driveshaft match up to the t56??? HELP
-
07-03-2013 #2
Registered User
- Join Date
- Apr 2012
- Location
- Woodstock, IL
- Posts
- 2,410
transmissions and driveshaft
The T56 is longer so you'll have to get it shortened. $800 seems a bit steep for an aluminum shaft though.. Must have an expensive slip yoke? You can reuse your slip as long as you're not using a T56 Magnum.
-DaleSchwartzPerformance
The leader in bolt-in muscle car chassis
SchwartzPerformance.com | GMachineChassis.com | Facebook | Twitter | Instagram
Dealer for: Forgeline, RideTech, Tremec, American Powertrain, Silver Sport Transmissions, GM Performance Parts, RECARO, Cerullo Seats, TMI Products, Vintage Air, Baer Brakes, Wilwood, BeCool, AFCO, Tanks Inc, Holley / Hooker, Ultimate Headers, Rick's Tanks, Moser Engineering, Currie, TechAFX, Stainless Works, II Much Fabrication, and many more
07-03-2013 #3
Registered User
- Join Date
- Apr 2013
- Location
- New Hampshire
- Posts
- 26
yea i know it was alot of money but they make the best around. but alls ill have to do is get it shortened and reuse the same yoke
07-04-2013 #4
Registered User
- Join Date
- Apr 2013
- Location
- New Hampshire
- Posts
- 26
Also wondering if the spline on the driveshaft thats in the th350 would fit the t56 transmission
07-18-2013 #5
Registered User
- Join Date
- Mar 2013
- Location
- NE Illinois (Chicago area)
- Posts
- 142
I don't believe so. I believe the Th350 is 27 spline output and the T56 is 31 spline(at least on the magnum). If thats what you're asking.
Reply With Quote
