First gen camaro front clip

[cwylie]

So I picked this car up yesterday and of course as I am looking at it I am seeing things I didnt the first time. Its an ex pro street car I am working to take back to a fun street driven hot rod. I noticed one of the body mounts were moved yesterday but when looking again today I noticed both body mounts were redone. I also noticed it looks like there is a larger than normal gap between the firewall and front clip. Im trying to remember what my 68 looked like and I looked online but I cant find any pictures. Is this a normal gap? Is it possible they pushed the front axle forward?

[cwylie]

Well I think I figure out why it looked funny. For whatever reason the previous owner removed the front subframe mounts from the subframe and the firewall. I guess these are the mounts I need to put them back on the firewall. Is that correct?

http://www.camarocentral.com/product_p/she-255l.htm

[Todd in Vancouver]

Looks like a good excuse to install an aftermarket front subframe ;)

[cwylie]

Yeah I was thinking about that but I still would have to repair the subframe mounts at the fire wall. Anyone know if the link I provided is the correct mounts I need to re-weld to the firewall?

[Todd in Vancouver]

That does look right to me. You can see it on my car in this picture where the subframe meets the firewall.

77420

[keithq69]

That's the right part.
You can get the dimensions online to make sure you get them in the right spot.

[cwylie]

Todd- Did you build that tube chassis?

[cwylie]

Anyone know where I could get the mounts that are on the subframe?

[Todd in Vancouver]

Todd- Did you build that tube chassis?

I would like to tell you yes because I'm that talented but No, it's a TCI front set up and I just got the matching rear and I'm neck deep in sorting it all out.

Please do post a build thread on how you are progressing.