For those who like custom stereos...

[SinCityChevelle]

I am excited to share my new project for my 1970 Chevelle so I decided to post up here. I brought my car in last Wednesday for a custom stereo system and it should be done by the end of this week. Here are the details...

Head Unit - Sony (I don't remember which model) The only reason I used this is because I had it lying around and I am going to change it out to a Kenwood DDX7015 when I have my custom center console made.

Component Speakers - Alpine Type X 6.5" with external tweeters mounted in custom fiberglass kickpanels wrapped in black vinyl.

6"x 9" Speakers - Alpine Type R flush mouned in deck behind rear seat.

Subwoofers - Two Rockford Fosgate T1 10" in custom downfire box wrapped in black vinyl with plexiglass windows.

Amplifiers - Two Rockford Fosgate T3002 2-channel amps and one Rockford Fosgate T4004 4-Channel amp mounted in custom floor wrapped in black vinyl with plexiglass windows.

batteries - Two optima red top Batteries (Soon to be replaced with Yellow Tops) in custom battery boxes mounted in the trunk. The boxes will also be wrapped in black vinyl with plexiglass windows.

I wanted to go with something clean and simple, but still good enough for show. I think the box design will be simple and not "Fast and Furious" style. I did the plexiglass purely for show purposes and to showcase my optima batteries since they are one of my sponsors. I also tried to stay somewhat true to the era by wrapping everything in black vinyl instead of carpet or using fiberglass and paint. I will post pics as soon as I get it back if anybody is interested.

[third base]

sounds like a pretty nice setup. one question though...why did you go with a sony deck? personal preference? why not alpine, eclipse, or kenwood excelon? not hating on your choice, just curious. Post some pics when it's finished.

[SinCityChevelle]

sounds like a pretty nice setup. one question though...why did you go with a sony deck? personal preference? why not alpine, eclipse, or kenwood excelon? not hating on your choice, just curious. Post some pics when it's finished.

It was actually the deck out of my girlfriends car so I just used it for now since its free. Eventually I am going to be putting in a Kenwood DDX7015 or an Alpine IVA-D300, but I am holding off on that until I get my custom center console made.

[third base]

good call!

[yody]

pictures? heres mine;

[SinCityChevelle]

Nice Yody! I should have my Chevelle back by Friday so I will post pics then.

[SinCityChevelle]

I went down to the shop today to check out the progress. I must say that I am more than happy with the way it is turning out. Here are a few teaser pics...

[F70t/a]

Nice, really well done!!!! Who is doing the work?

[SinCityChevelle]

Cory Lewis at Ultimate Electronics here in Las Vegas. He has done my 350Z too...

http://www.mikeythekidlv.com/hinsystem.JPG

[J-Rod]

I went down to the shop today to check out the progress. I must say that I am more than happy with the way it is turning out. Here are a few teaser pics...

aaah, very cool, I want to do something similiar in my 68. Question for you; how is your roll cage working with your trunk stereo work? I'm putting an 8 point rollbar in, and with the back kickers of the bar, i'm finding it to be a pain to design around.

Make sure to post finished pics!

[SinCityChevelle]

I don't have a roll bar in my Chevelle yet. If I do get a roll bar I will have one custom made. I don't need it to be functional for rollovers, just a safe place to mount 5-point harnesses.

[CamaroAJ]

How much does that weigh, i want something like that in my camaro but don't want to put a **** ton of weight in it.

[SinCityChevelle]

A.J. - I don't know how much that weighs, but probably a lot. I would suggest coming up with something that is easily removeable. The stereo system in my 350Z can be removed and put back in within 10 minutes. Maybe a sub box on each side of the trunk that you can pull out and have quick disconnects on the wires behind it.

[F70t/a]

Cory Lewis at Ultimate Electronics here in Las Vegas. He has done my 350Z too...

http://www.mikeythekidlv.com/hinsystem.JPG

Damn he does do good work!!!!

[slownova]

thats cool, good choice on the rockford stuff. mine is also all molded togther a lil diffrently. all my panels are removable.

[SinCityChevelle]

^^^^Nice! That looks good.

[rockdogz]

Looks sweet... do you guys have to worry about airflow for the amps when they're mounted like that?

[slownova]

Looks sweet... do you guys have to worry about airflow for the amps when they're mounted like that?

those amps don't ever get hot, on top of that all my air-ride stuff is behind the driver side amp. all my stuffs in a 70 chevelle SS also.

[SinCityChevelle]

^^^What he said.

[XTRMEASURES]

hey sin do you have pics of it finished yet??