FS T56 Transmission & parts

[rusty63ss]

SOLD!

Okay guys. I am selling my T56 swap setup. This came from a '97 Camaro and has approx 91k. This tranny will work with both GenI and GenII SBC motors. If you have a two piece rear main you will need a conversion flywheel.


This is NOT compatible with GenIII or newer motors.
This is complete from the flywheel bolts to the rear u-joint. You will receive the following.


T56 tranny w/bell housing
Master and slave cylinders
Clutch and Pressure Plate consider them cores
Flywheel Should be resurfaced
Pedal Assembly
Driveline
Torque Arm
Crossmember


Paypal accepted. Local pickup preferred but I can ship it at your expense. Ships to lower 48 only.
I would like $1500. I am in the Medford, OR area.


https://static1.pt-content.com/images/pt/2013/04/photo1_zpsbc56d996-1.jpg
https://static1.pt-content.com/images/pt/2013/04/photo2_zps5aa6e640-1.jpg

[rusty63ss]

I will be traveling to Vancouver, WA on Saturday 4/13/13 from Medford, OR. I could meet a buyer on the I-5 corridor.

[rusty63ss]

New lower price! $1500 plus shipping.

[TheJDMan]

Do you know what the gear ratios are?

[rusty63ss]

2.66:1 1.78:1 1.30:1 1.00:1 0.74:1 0.50:1 reverse 2.90:1

[TheJDMan]

Damn, I need the .80 and .64 OD.

[rusty63ss]

Damn, I need the .80 and .64 OD.

The GM aftermarket unit?

[Z06vet]

Any interest in selling the resevoir & rubber line from the master cyl?
Scott

[rusty63ss]

Any interest in selling the resevoir & rubber line from the master cyl?
Scott

I am working on a deal for the complete setup. If it does not work out I will let you know.

Thank you for your interest.

Dhamen