View Full Version : FS - T56 complete viper main, upgraded internals and more
Donovan
04-04-2013, 08:08 AM
LS1 T56
Upgraded with Viper shaft, fully upgraded internals. About 6000 miles on rebuild. Parting my project.
It will come with an LS7 clutch assembly, LS1 bellhousing, Tick speed bleeder, TOB, pro 5.0 shifter and yolk
$2500
Located in Houston TX
Donovan
04-04-2013, 11:39 AM
replied to PM
NvrDun71
04-04-2013, 11:43 AM
I basically just duplicated this same setup for my build, I would have bought everything. I'm in Houston as well, bump for a good deal
brownz
04-04-2013, 04:27 PM
Stupid Wedding LOL GLWS
67machrod
04-04-2013, 06:05 PM
Donovan,
I am from Sugar Land. Can you PM me your number? Thanks
Donovan
04-04-2013, 08:00 PM
Stupid Wedding LOL GLWS
my condolences ;)
Donovan
04-04-2013, 08:00 PM
Donovan,
I am from Sugar Land. Can you PM me your number? Thanks
sending shortly
Donovan
04-05-2013, 06:11 AM
Calls returned. PMs answered. Been crazy hope I didn't miss anyone.
brandonc707
04-05-2013, 03:32 PM
What else would I need to buy to bolt this to my sbc (NON LS) with existing 4 speed?
Donovan
04-05-2013, 07:17 PM
What else would I need to buy to bolt this to my sbc (NON LS) with existing 4 speed?
I haven't researched this swap. If it's anything like a Pontiac, you'll need an adapter plate for the TOB and a special bellhousing.
Donovan
04-07-2013, 06:18 PM
LS1 T56 upgrade by TDP
Their site-
http://www.texasdrivetrainperformance.com/t56.html
Comes with stock LS1 bell, LS7 clutch assembly, Tick speed bleeder, PRO 5.0 shifter, Viper yoke, new TOB
About 6000 miles on everything since rebuilt, no issues. Mobil one oil.
Stage 2 plus Viper main shaft and tail housing upgrade. From their site the follow is what was done.
Stage 1 - $540
-Carbon kevlar synchro rings
-Keys and springs
-Fork pad kit
-Seals
Stage 2 - $680 (highly recommended)
All the above plus
-Billet 3-4 keys
-Steel 3-4 shift fork
Donovan
04-07-2013, 06:22 PM
This was my daily driver for a little while then I took it off the road. It has never seen the track. sadly... lol
AmazinAsian
04-08-2013, 09:06 PM
Can you pm me your number? Thanks!
NvrDun71
04-09-2013, 06:33 AM
What tail housing is on the trans? Viper or modified F-Body?
Donovan
04-09-2013, 06:57 AM
What tail housing is on the trans? Viper or modified F-Body?
The shifter position and type is in the fbody position. It is a modified fbody tail.
Donovan
04-10-2013, 08:48 PM
This transmission is SOLD:bananna2:
Powered by vBulletin®