Full length console from MCI

[MCI]

This is a project we are working on for a 55 chevy. we can make this console in any length, so if someone wanted to install this console in a first gen F body, we can move the rear upright forward 13 inches, trim the tower to fit under the dash and adjust the trim line on the bottom. We will offer the glove box, cup holders and a selection of shifter plates.


68241

68242

This picture is of the master pattern prior to casting the molds, so the flange on the bottom gets cut off of the part and the tower gets trimmed to fit under the dash. We will have pictures of a complete console by the end of the week.

Mike
MCI
260-602-7651
[email protected]
http://www.modernclassicsinteriors.com

[GRNOVA]

Mike I may need to call you I am looking for a custom full console for my 65 Nova. Here is my concept. I must have a removable top so I can access my electronics.


https://static1.pt-content.com/images/pt/2012/11/7D694C4A689F46C6998CA085F6EE486F95000000-1.jpg

[MCI]

Mike I may need to call you I am looking for a custom full console for my 65 Nova. Here is my concept. I must have a removable top so I can access my electronics.


https://static1.pt-content.com/images/pt/2012/11/7D694C4A689F46C6998CA085F6EE486F95000000-1.jpg
We can do that. Feel free to call any time.

Mike
MCI
260-602-7651
[email protected]
www.modernclassicsinteriors.com

[Blevinator]

Mike I may need to call you I am looking for a custom full console for my 65 Nova. Here is my concept. I must have a removable top so I can access my electronics.


https://static1.pt-content.com/images/pt/2012/11/7D694C4A689F46C6998CA085F6EE486F95000000-1.jpg


Could you draw this console with a raised armrest?