DSE Wiper install- wiring colors/position for plug? 67 Camaro

[boostin05blacksti]

Hi guys, bought this used but in new condition.. All original packing ect.. But with no instructions. Emailed DSE yesterday and they sent them over. For the plug on the motor is showing 5 wires on the instructions and my harness only has 4 supplied. Also they say in the instructions that the plug comes with the blanks already installed. Attached is a picture of the blanks which where already installed, and what wires I have.. Want to get this correct before I put 12v to it.. Thanks Steven

https://static1.pt-content.com/images/pt/2012/12/BCA6A7C0CA31481381E3E55ED23A374A24730000-1.jpg

https://static1.pt-content.com/images/pt/2012/12/C627D09BCC32438BBB251E3E3456CFBD24730000-1.jpg

[rivs68]

I have the four wire...Here's a pic of the wiring...hope this helps


68131

[boostin05blacksti]

I have the four wire...Here's a pic of the wiring...hope this helps


68131


hmmm..Now I dont know which end it up. It seems by your instructions that I have wired it correctly. Thanks for taking the time to post that for me. The instructions I received from DSE are what I posted a picture off and it says on the first page for a 67 camaro. Maybe they changed the wiring some time through production. For now I will wire it up the way your instructions show and the way I have it in the picture. Thanks again for the help, Steven

[lutzy]

Yes they did change the wiring on the newer models. I also have 4 wires and that looks right. Mine is a few years old.