SRT8 or Z06 route?

[slimneverdies]

Hey guys, I have a question... I have a 77 Chevy C10 that has to have a brake upgrade. Im currently looking at two options. First option, I have a complete rearend out of a 2007 Jeep Cherokee that has Brembo brakes with 350 x 28mm vented rotors on it. Im having a isssue trying to find some Brembo's to match the front spindles on the C10 which brings me to my next option. Second option, I can order the front kit for my C10 spindle from Kore3 to put Z06 brakes in front but now i run into the issue of finding a bracket to mate the rear axle with the Z06 calipers. I read on another forum that guys are using Z06 rotors as an upgrade or replacement on there SRT8's so I think the rotors arent the issue.

Hopefully someone can point me in the right direction. One thing for sure is I dont want to use the 10 bolt that came in the C10. These SRT8's came out the factory stock running 430 hp on the Dana 44

Thanks
Slim

[wellis77]

The GMR has your rear-end problem solved, http://thegmr.com/?page_id=343.

65970

65971

[slimneverdies]

Wow, thanks wellis. I should have come here a long time ago. This looks like a nice piece. Do you know of anuone that is using them?

[wellis77]

Not yet, I will be on my next project but you would have to check with Jason at the GMR.