C5, C6 rims on a 64-67 A-body

[Groundczero]

I like the look of some of the newer vette rims, the like the c5 mosport rims, and the c6 z06 rims.
Was wondering if anyone put them on the early A-bodyies. I will be doing the f-body ls1 brake upgrade.

[Groundczero]

Anyone?

[analyte]

I have this link in my favorites just over halfway down, but there may be more if you search the user name on Chevelles.com

http://www.chevelles.com/forums/show...orvette&page=7

[analyte]

Double post....

[ponchoblue]

cant get an answer

[bmiller]

Not 64-67 info but I run base C6 wheels on a 71 El Camino with no fitment problems and my dad runs C5 thin spokes on a 68 Buick Skylark convertable with no problems either. 2 inch adaptor in front and 2.5 inch in the rear on both. I think C6 Z06 would be to wide for stock wheel wells

[astroracer]

I am running Re-pop C6 18" rims on my '02 collector edition.

These are in "black" chrome and have held up very well for three years.

They are built with a much milder offset then the stock vette rims.
I also have a set of 17's on the Formula. I think they emulate the Z06 wheels?


Check out Wheel Replica's and OE Wheel.
I got both sets off eBay for super cheap. The ones on the yellow car were under a grand shipped and the red cars were less then 900 bucks WITH 275/40 Nexens mounted on them!
Mark

[MK69RSSS]

I got a set of real gm c-6 wheels. Might have 500 miles on them. 601-672-8830

[ponchoblue]

what size lets see what they look like

[Shacks67NR]

Anybody else lately fit newer Vette wheels to anything. I love the Z06 split 5 spokes.

[ChevelleNV]

Anybody else lately fit newer Vette wheels to anything. I love the Z06 split 5 spokes.

Here is some C7 wheels on my Chevelle




for the front I custom made some 2" adapters, and the rear is a 5th Gen IRS.

More info @ http://chevellenv.com/2015/06/rolling-chassis/