Brake kit dimension for Wilwood Pro spindle needed.

[feeble]

I am researching options for a wheel / brake combination for my Mustang. I'm designing my suspension around the Wilwood Pro Spindle and am looking at Wilwood PN 140-9919 (or one of its variants) with SL6R calipers: http://www.wilwood.com/BrakeKits/BrakeKitsProdFront.aspx?itemno=140-9919. Can Wilwood or any of their dealers give me a dimension from the wheel mounting surface on this kit referenced back to some point on the Pro Spindle? I did find a dimension that said it moved out from stock about about 0.68" but I have no baseline dimension to start from.

Thanks!

[Jay@GMR]

I may be able to help you out with that. I happen to have the parts on hand. I will touch base with you tomorrow!

Jay

[silver69camaro]

The wheel mount surface is 2.3" from where the inner wheel bearing stops on the spindle. Or, measure back 1.6" from the outside end of the spindle pin.