67bird
04-14-2012, 06:33 AM
I have up for sale the following:
ATS/Speedtech Chicane coil over conversion package for Bilstein Shock absorbers.
2 Bilstein ASN series coil over shocks with the ATS Spec valving for the kit
2 adjusters for the above shocks (1 for each shock)
1 set of Global West lower control arms (GW# CTA-79H) modified by ATS by welding in the lower Chicane Bracket for me at the time of purchase.
Due to the fact that the lower bracket has already been welded in as well as the spacers for Bilsteins being tacked into place, I need to sale all of the components together. I had this for sale in another add with more parts, but listed it separate here due to add being all over the place with questions and comments on the parts. As far as fitment it would work with any first gen F-body or third gen X-body subframe. Also, I cannot comfirm or deny that this will work with tru-turn kits or whatever else any particular person may have. Parts are in Indianapolis, In 46237. I am asking $750 OBO plus shipping for them. I accept M/O, bank check, or Paypal (plus fees). Would also accept personal check, but will need to clear my bank before I ship. All parts have zero miles on them. They were installed for mock up to check shock clearance. I started to fit the upper mounts, but nothing major has been done to them.
http://www.speedtechperformance.com/index.cfm/page/ptype=product/product_id=216/category_id=237/home_id=-1/mode=prod/prd216.htm
http://www.speedtechperformance.com/index.cfm/page/ptype=product/product_id=277/category_id=237/home_id=236/mode=prod/prd277.htm
I am open to reasonable offers so if you are on the fence don't be shy!!!!!!!!!!!!!!!!!!
**Note: ATS spindles in the photo have already sold. Steering arms will be in another add posted after this one.
ATS/Speedtech Chicane coil over conversion package for Bilstein Shock absorbers.
2 Bilstein ASN series coil over shocks with the ATS Spec valving for the kit
2 adjusters for the above shocks (1 for each shock)
1 set of Global West lower control arms (GW# CTA-79H) modified by ATS by welding in the lower Chicane Bracket for me at the time of purchase.
Due to the fact that the lower bracket has already been welded in as well as the spacers for Bilsteins being tacked into place, I need to sale all of the components together. I had this for sale in another add with more parts, but listed it separate here due to add being all over the place with questions and comments on the parts. As far as fitment it would work with any first gen F-body or third gen X-body subframe. Also, I cannot comfirm or deny that this will work with tru-turn kits or whatever else any particular person may have. Parts are in Indianapolis, In 46237. I am asking $750 OBO plus shipping for them. I accept M/O, bank check, or Paypal (plus fees). Would also accept personal check, but will need to clear my bank before I ship. All parts have zero miles on them. They were installed for mock up to check shock clearance. I started to fit the upper mounts, but nothing major has been done to them.
http://www.speedtechperformance.com/index.cfm/page/ptype=product/product_id=216/category_id=237/home_id=-1/mode=prod/prd216.htm
http://www.speedtechperformance.com/index.cfm/page/ptype=product/product_id=277/category_id=237/home_id=236/mode=prod/prd277.htm
I am open to reasonable offers so if you are on the fence don't be shy!!!!!!!!!!!!!!!!!!
**Note: ATS spindles in the photo have already sold. Steering arms will be in another add posted after this one.