Results 1 to 6 of 6
-
02-19-2012 #1
Registered User
- Join Date
- Nov 2011
- Posts
- 1
67 tempest / 2005-07 C6 vette wheels?
I have a 67 Tempest , and am thinking about putting some 05 C6 Corvette wheels on it, 18x8.5 front 19x10 rear, and want to see if anyone has successfully done this
before?
-
02-28-2012 #2
Registered User
- Join Date
- Sep 2009
- Location
- Corpus Christi, TX
- Posts
- 183
Pretty sure you would have to run some really thick spacers, since there is no real offset on the Vette wheels.
1967 Pontiac LeMans in the works
02-29-2012 #3
Registered User
- Join Date
- Mar 2008
- Location
- Wichita, KS
- Posts
- 375
agreed. there are reproductions that have better offsets that you can look into.
67 GTO, LS2, T56
WILWOOD, FORGELINE, RIDETECH
03-02-2012 #4
Registered User
- Join Date
- Jan 2006
- Location
- Snohomish, Washington
- Posts
- 2,235
Your going to have to run some larger spacers... I have 19x11s all around on my '67 cutlass with a 295 in the front and a 305 in the rear. With my sizes I had to run a 3" spacer in the front and a 2.75" spacer in the rear. My wheels are wider then the sizes you posted but gives you an idea on the size of a spacer you will need to run.
Matt
03-04-2012 #5
Registered User
- Join Date
- Jan 2009
- Location
- NYC
- Posts
- 121
who make the reproductions id like a set of black zo6 wheels
yes it does have positraction
03-05-2012 #6
Registered User
- Join Date
- Dec 2011
- Location
- Calgary
- Posts
- 96
I'm fighting a set of 19x12's rear and 19x10's front,on my 71 Monte....I feel your pain
Warren
Reply With Quote
