Need Rocket Injectors but in 18"

[Ishmael]

You guys have always been great to find wheels. I'm acting as a go between helping a friend and a builder with a 40 Plymouth Coupe and I want to do this right plus I know guys like you all who can help me out. I think the polished injector is perfect but its only available in 15" sizes. I'm not looking for an Ansen or a Saltflat. Its gotta be close to the ignitor but larger. I still don't know how to post a pic from the web but here's the url http://www.rocketracingwheels.com/pr..._image-343.jpg
thanks guys.
Scott

[dontlifttoshift]

I think this will be as close as you will get. http://www.billetspecialties.com/ite...cid=128&pid=77

[Ishmael]

I thought about those. I don't know that I want to polish billet though. Should have said that earlier. The Wheel Vintiques Series 1 Cruzer won't work either.
Thanks though.

[Ishmael]

I found these Cragars in a 17 but they only have 2 back spacing sizes. I think I'm going to need some photo shopping.

[dontlifttoshift]

The wheel you pictured was polished. The legacy is available powdercoated gray with polished highlights if that helps.

[Ishmael]

They need to be chrome but thanks. I'll figure out what brakes are being used and what the backspacing needs to be to see if the Cragars will clear and then get a photoshop done.

[DriverzInc]

We're cutting something similiar out of billet, in three piece, concave like that too, right now. We have two different versions of it right now.

Here's the first rendering:



Here's the one we just cut and will be done right here before Christmas for our customer:

[Ishmael]

I was just admiring the foose legends I bought from you just two days ago. They look good but I need something chrome and little more old school. They are going on a 40 plymouth coupe with modern chevy engine trans, axle and suspension. I wish he was going with something out of a Magnum SRT8 but what can you do. So a fusion of new and old with a bit of soft edges is what I need but not in billet.