Good build thread for C5 Front disk, and LS1 rear disk conversions for 2nd gen F-body

[ryeguy2006a]

I am looking for a good build threads that have pictures with a conversion for C5 front brakes for my 2nd gen Trans Am. I am also looking for a good build thread of a conversion for the rear LS1 Brakes off of an LS1 F-body. I have searched on here for hours with nothing that was a direct build. If you guys have anything like this please post a link for me to follow. This brake kit will be the first step towards my eventual conversion to PT. My car is currently stock with a few bolt ons. I am looking forward to this process.

Thanks,
Ryan

[SoonerTA]

What are you doing over here? haha

I know, a while back, there were some great posts on this topic but now I can't seem to find them. I hope someone chimes in here and helps out. I have most of the parts sitting waiting to be installed but trying to get her back on the road first before I tear into it again. The fun never seems to end, ha. But I can't wait to get rid of these very small brakes:

[ryeguy2006a]

I am surprised at the amount of people that are on several other forums that I am on. Small world.

[Randy67]

Here are a couple links, its to a Camaro site but info is good
C5 http://www.nastyz28.com/forum/showthread.php?t=74546

This is for S10 Blazer rear discs, but they mount the same as the LS1, just a slightly smaller rotor size. I've done both LS1 and Blazer brakes, both installed the same.
http://www.nastyz28.com/forum/showthread.php?t=109454

[gort69]

Here's an LS1 rear writeup I did for a 1st gen F body. Fairly sure the the exact same info would apply to a Gen 2. http://www.camaros.net/forums/showthread.php?t=161383