Results 1 to 6 of 6
Thread: Changing pulley on my SD7
-
09-25-2011 #1
Registered User
- Join Date
- Aug 2004
- Location
- Crown Point, Indiana
- Posts
- 1,107
Changing pulley on my SD7
Do they make an 8 groove pulley for my Sanden sd7? I need one to make my set up work!
I have a 6 rib now!
-
09-25-2011 #2
Registered User
- Join Date
- Jun 2005
- Location
- Lynnwood Wa.
- Posts
- 248
Yes, Contact this vendor they will set you up.
http://www.polarbearinc.com/PBPC/Hom...en_Sanden.htmlOliver Shultz
It's OK to giggle and snicker. don't laugh and point
09-25-2011 #3
Registered User
- Join Date
- Aug 2004
- Location
- Crown Point, Indiana
- Posts
- 1,107
Sweet thanks!
09-25-2011 #4
Registered User
- Join Date
- Dec 2006
- Location
- Out of the Burbs of Detroit to SoCal, then onto my ancestral homeland, the woods of Cascadia
- Posts
- 1,753
What A/C Compressor Bracket are you using? Like the way it pulls the A/C pump into the profile of the engine
Greg Fast
(yes, the last name is spelled correctly)
1970 Camaro RS Clone
1984 el Camino
1973 MGB vintage E/Prod race car
(Soon to be an SCCA H/Prod limited prep)
10-13-2011 #5
Registered User
- Join Date
- Aug 2004
- Location
- Crown Point, Indiana
- Posts
- 1,107
Thanks Greg I made it myself.
Just got the A/C pulley back from the machine shop made it a 7 rib and the a/c cover will keep the belt from coming off.
11-15-2011 #6
Registered User
- Join Date
- Aug 2004
- Location
- Crown Point, Indiana
- Posts
- 1,107
8 rib baby!
Ok, Finished up a little more on the F.E.A.D. got the 180 amp back and found an 8 rib 1.9" pulley. Just finished up the sd7 8 rib pulley.
Reply With Quote
