Wilwood Master Cylinder Question

[67gtonut]

Hey guys..... still pretty new here..... So sorry if this seems a little basic of a question....

67 GTO..... Converted a few years ago from Drum to a Stock style Disc set up in Front...



I did not go to Power..... still dont feel the need to at this point.....

I want to dress up the engine compartment.... and I love the Wilwood Masters....

Would this master be a direct bolt in for my current master cylinder?

Specs:

http://www.wilwood.com/MasterCylinde...no=260-9439-BK




Thanks guys....

Troy

[ProdigyCustoms]

Yes it will.

Save some money here.

http://www.protouringsuperstore.com/...60%2D9439%2DBK

[67gtonut]

Thank you Frank.....

I was hoping you would answer.....

Last question.....

In the Specs - they call the port furthest away from the firewall the "primary" ...... but this is still for the rear brakes, like most stock set-ups...... right? Or does Wilwood reverse this and want you to plumb the Front brakes into that "primary" port?

[67gtonut]

Found my answer:

http://www.wilwood.com/PDF/DataSheets/ds487.pdf

Yes...... Front port or "Primary" will be used for Front Brakes.....


Frank..... will order this week....

Thank you